Call: (847) 758-3434
0 0 7 Outreach
All Seminars are from 6-10 pm. They are
sponsored by the Illinois EPA for the repair
industry and are FREE!
State of Illinois Complex (Collinsville)
1100 Eastport Plaza
Collinsville, IL 62234
College of DuPage (COD)
425 Fawell Blvd.
Glen Ellyn, IL 60137
Moraine Valley Community College
10900 S 88th Ave.
Palos Hills, IL 60465
Joliet Junior College (JJC)
1215 Houbolt Rd.
Joliet, IL 60431
Prairie State College (PSC)
202 S. Halsted St.
Chicago Heights, IL 60411
Morton College (MC)
3801 S. Central Ave.
Cicero, IL 60804
Triton College (Triton)
2000 5th Ave.
River Grove, IL 60171
Truman College (Truman)
1200 W. Sunnyside Ave.
Chicago, IL 60640
Oakton Community College (OCC)
1500 E. Golf Rd.
Des Plaines, IL 60016
Lake County High Schools Technology
Campus (Lake County)
19525 W. Washington St.
Grayslake, IL 60030
Fixing Emission Problems by Reprogramming
101 April 26, 2007 (Thurs) Joliet Junior College
102 May 8, 2007 (Tues) Lake County H.S. Technology Campus
103 August 22, 2007 (Wed) Prairie State College
104 September 10, 2007 (Mon) College of DuPage
105 November 13, 2007 (Tues) Oakton Community College
This one-night class will cover the how’s and why’s of vehicle computer reprogramming/
flashing. The need to program modules on vehicles is growing everyday. Learn what modules
can be programmed and how the different manufacturers are using this technology. The Big 3
domestic manufacturers’ procedures for flashing will be shown. Both factory supported J2534
and “generic” programming tools will be covered. This class will help both shop owners and
technicians better understand this growing service area.
Emission Repair Strate gies
201 June 25, 2007 (Mon) Morton College
202 August 13, 2007 (Mon) Joliet Junior College
203 August 27, 2007 (Mon) Collinsville
204 September 20, 2007 (Thurs) Lake County H.S. Technology Campus
205 September 24, 2007 (Mon) Oakton Community College
206 October 15, 2007 (Mon) Triton College
One-night seminar devoted to using techniques learned in other seminars to repair OBD
emission failures. OBD testing will be reviewed and actual case studies will be used to help
understand the strategies used to repair emission failures. Computerized information systems
and enhanced functions in aftermarket and factory scan tools will be illustrated to make
diagnosing OBD repair easier.
YOU “CAN” RUN & SET MONITORS
301 April 18, 2007 (Wed) Prairie State College
302 April 23, 2007 (Mon) College of DuPage
303 June 27, 2007 (Wed) Triton College
304 August 16, 2007 (Thurs) Morton College
305 August 28, 2007 (Tues) Collinsville
306 September 4, 2007 (Tues) Moraine Valley Community College
307 October 18, 2007 (Thurs) Truman College
308 November 15, 2007 (Thurs) Lake County H.S. Technology Campus
309 December 6, 2007 (Thurs) Oakton Community College
This one-night seminar will introduce the newer Controller Area Network (CAN)
communication system found on late model vehicles and cover problems and solutions for
setting readiness monitors to “complete” on OBD vehicles. CAN system types and tools will
be discussed for the Big 3 manufacturers. Rejected vehicles have become a major issue on
retests. This seminar will address the most common problems of why monitors don’t set to
ready and how to diagnose & fix the problems.
Click tabs to swap between content that is broken into logical sections.