Repealed Index
88
Section: 3412 Thickness of Shells, Heads, Bulkheads, and Baffles (Repealed)
Section: 3413 Closures for Fill Openings and Manholes (Repealed)
Section: 3414 Vents (Repealed)
Section: 3415 Emergency Flow Control (Repealed)
Section: 3416 Gauging Devices (Repealed)
Section: 3417 Method of Test (Repealed)
Section: 3421 General Requirements (Repealed)
Section: 3422 Thickness of Shells, Heads, Bulkheads, and Baffles (Repealed)
Section: 3423 Closures for Fill Openings and Manholes (Repealed)
Section: 3424 Vents (Repealed)
Section: 3425 Emergency Flow Control (Repealed)
Section: 3426 Gauging Devices (Repealed)
Section: 3427 Method of Test (Repealed)
Section: 3431 General Requirements (Repealed)
Section: 3432 Thickness of Shell, Heads, Bulkheads, and Baffles of Non-Asme Code Tanks
(Repealed)
Section: 3433 Closures for Manholes (Repealed)
Section: 3434 Vents (Repealed)
Section: 3435 Outlets (Repealed)
Section: 3436 Gauging Devices (Repealed)
Section: 3437 Method of Test (Repealed)
Section: 3501 General Requirements (Repealed)
Section: 3502 Specific Requirements (Repealed)
Section: 3503 Marking (Repealed)
Section: 33710 Protection of Fittings (Repealed)
Section: 33711 Emergency Discharge Control (Repealed)
Section: 33713 Supporting and Anchoring (Repealed)
Section: 33714 Gauging Devices (Repealed)
Section: 33715 Pumps and Compressors (Repealed)
Section: 33716 Testing (Repealed)
Section: 33717 Marking (Repealed)
Section: 33718 Certification (Repealed)
Section: 34010 Certification (Repealed)
APPENDIX D TABLE A Minimum Thickness of Heads, Bulkheads, and Baffles (Repealed)
APPENDIX D TABLE B Appexdix D Material Thickness (Repealed) - Table B Minimum Thickness
of Shell Sheets (Repealed)
Sub Chapter: e Traffic Safety (Except Hazardous Materials)
Part #: 440 Minimum Safety Standards for Construction of Type I School Buses
APPENDIX A Federal Motor Vehicle Safety Standards (FMVSS) and Related Regulations
(Repealed)
APPENDIX B First Aid Kit Requirements (Referred to in Section 440.420(lk)) (Repealed)
ILLUSTRATION A Hexagon Shaped Stop Signal Arm (Repealed)
Part #: 441 Inspection Procedures for Type I School Buses
ILLUSTRATION E Driver's Pre-Trip Inspection Requirements and Sample Form (Repealed)
Part #: 442 Minimum Safety Standards for Construction of Type II School Buses
Sub Part: B Construction of Body
Section: 225 Doors (Repealed)
APPENDIX A Hexagon Shaped Stop Signal Arm (Repealed)
APPENDIX C Specification for Sheet Reflective Material--Encapsulated Lens (Based on FHWA
Notice N 5040.17, June 15, 1976) (Repealed)
APPENDIX D Sheeting and Tape, Reflective: Nonexposed Lens (Repealed)
Part #: 443 Inspection Procedures for Type II School Buses
ILLUSTRATION E Driver's Pre-Trip Inspection Requirements and Sample Form (Repealed)
Part #: 451 Administrative Requirements for Official Testing Stations
Section: 50 Definitions (Renumbered)
APPENDIX A Inspection Procedures/Specifications for Type I School Buses (Repealed)
APPENDIX B Inspection Procedures/Specifications for Type II School Buses (Repealed)
APPENDIX C Inspection Procedures/Specifications for Type I Special Education School Buses
(Repealed)
APPENDIX D Inspection Procedures/Specifications for Type II Special Education School Buses
(Repealed)
APPENDIX E Driver's Pre-Trip Inspection Requirements (Repealed)
APPENDIX G Illinois Minimum Standards for School Bus - Van Type Conversion 1-16
Passengers Purchased Prior to September 1974 (Repealed)
